The information system of the IMPULSE project is an online tool developed in the framework of the Interreg MED Programme 2014-2020. IMPULSE introduces an integrated management support system for planning energy efficiency interventions in public buildings.
Post date: 26 Ιουλ 2019
Historic buildings are defining elements of city centres but also responsible for a large share of greenhouse gas emissions. In order to reduce their energy demand, it is important to improve envelopes’ thermal transmittance without damaging the historic integrity of their façades by applying interior insulation.
Thus, a detailed planning is needed to guarantee that case-specific variables are well considered. In this study, a holistic performance-based evaluation method is developed.
Post date: 11 Ιουν 2019
This issue of the DYNASTEE newsletter provides information on the 8th Summer School with focus on energy performance of buildings that will take place this summer in Granada, Spain, a second Summer School on modelling and forecasting in energy systems that will take place in Copenhagen, Denmark and finally the announcement of the Nordic Symposium 2020, that will take place in Tallinn, Estonia. In the frame of the 6th IEA-EBC Annex 71 meeting a symposium was organised by DYNASTEE for which you will find a short summary article.
Post date: 21 Μάιος 2019
Climate.OneBuilding.org is pleased to announce the availability of new climate data (TMYx) for more than 1,900 locations for the following 25 countries in Europe: Aland Islands, Austria, Belgium, Denmark, Estonia, Faroe Islands, Finland, France, Germany, Gibraltar, Hungary, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Svalbard and Jan Mayen, Sweden, Switzerland.
Post date: 2 Απρ 2019
A large part of the stock of Italian educational buildings have undertaken energy retrofit interventions, thanks to European funds allocated by complex technical-administrative calls. In these projects, the suggested retrofit strategies are often selected based on the common best practices (considering average energy savings) but are not supported by proper energy investigations.
Post date: 14 Μαρ 2019
Energy consumption in new buildings can be reduced at the design stage.
Post date: 26 Φεβ 2019
The Modelica Buildings library is a free open-source library with dynamic simulation models for building and district energy and control systems. The library contains models for:
Post date: 11 Φεβ 2019
This article presents a method to generate Typical Meteorological Year (TMY) data sets for use in calculations of the energy performance of buildings, based on satellite derived solar radiation data and other meteorological parameters obtained from reanalysis products.
Post date: 8 Φεβ 2019
eQuest is a freeware, easy to use building energy use analysis tool which provides professional-level results with an affordable level of effort. It allows users to perform detailed analysis of today's state-of-the-art building design technologies using today's most sophisticated building energy use simulation techniques but without requiring extensive experience in the "art" of building performance modeling.
Post date: 24 Ιαν 2019
On 26th and 27th November 2018, the Competence Centre Building Envelope of Lucerne University of Applied Sciences and Arts once again hosted the international conference FACADE 2018 at the KKL Lucerne. This year’s event has been also the closing conference of the COST Action TU1403 “Adaptive Facades Network”, which was initiated by the Lucerne University of Applied Sciences and Arts four years ago.
Post date: 19 Δεκ 2018