BUILD UP webinar series: Energy Performance of Buildings standards (EN/ISO) supporting the implementation of EPBD
This webinar will take place on the 26th May, 12.00 to 13.30.
Webinar 4 – EPB standards hourly vs monthly methods (12h00 – 13h30 – 26th May 2020)
Following the successful previous webinars:
- “Guidance and examples for the EPB standards’ flexibility”,
- “EPB standards overview: why, how, what!”,
- “How to make good use of the outputs of the EPB assessments”,
this 4th webinar introduces and demonstrates the main possibilities and limitations of the monthly versus the hourly calculation method.
In particular within Europe, more and more countries are working on the concrete implementation of the set of EPB standards for the assessment of the energy performance of buildings.
The EPB standards offer specific choices to tailor the methodology to the national or regional situation. This was the subject of the second webinar. One of the key decisions in this process is whether or not to implement a calculation method with hourly calculation intervals instead of monthly. The set of EPB standards facilitates both choices.
The intention of this webinar is to show the main possibilities and limitations of both approaches, as described in the EPB standards.
Some issues that will be discussed during this seminar:
- Is it easier to describe and calculate dynamic effects and interactions in low energy buildings with the hourly or the monthly method?
- Is it easier to describe and calculate the operation of technical systems with the hourly or the monthly method?
- Is it true that the hourly method inevitably requires more input data from the user than the monthly method?
In the past decades, the monthly method was quite satisfactory due to the high thermal losses and significant heat capacity of buildings. In the last years, the thermal insulation of new building envelopes has been greatly improved and this dramatically reduced the energy needs for heating. Deep renovation is encouraged and this means again an improved thermal envelope. Solar gains and internal heat gains play an increasingly important role, with strongly variations over the day and week. Consequently, the traditionally simple monthly calculation method is challenged: how to take into account these dynamic effects in a realistic way and keep it simple? Or is an hourly calculation method a better alternative, without giving in on simplicity and transparency….
Programme (provisional timing):
- Introduction by the moderator (overview, practical information on participation (Q&A), etc.)
- 12h05 - 12h20 – Jaap HOGELING, Chairperson CEN/TC 371, Energy Performance of Buildings project group, European Committee for Standardization (CEN)
- Introduction and overview of current EU practices
- 12h20 - 12h40– Dick VAN DIJK, EPB expert, EPB Center
- Energy need and indoor temperatures calculation: hourly or monthly?
- 12h40 - 13h00 – Laurent SOCAL, independent EPB expert
- Hourly or monthly? What about technical systems?
- 13h00 - 13h28 – Moderated Q&A
- Closing remarks by the moderator
Series of webinars on the EPB standards
This webinar series is jointly organized by BUILD UP and EPB Center’s experts under the scope of Service Contract ENER/C3/2017-437/SI2-785.185 “Support the dissemination and roll-out of the set of Energy Performance of Buildings standards developed under EC Mandate M/480” (duration September 2018 - September 2021).